KAOS: Shades Under 6' Weight Bar Assembly Kit Instructions

---

• Lower the bottom edge of the shade until it is approximately 5 inches above the ground.
• Align the front and rear steel bars with the three mounting holes on the hem bar.
• Attach the front and rear steel bars to the hem bar:
  • • Begin by securing one end of the steel bars with one of the three provided weight bar screws. Leave the screw slightly loose.
    • Secure the opposite end with another weight bar screw, also leaving it slightly loose.
    • Install the third screw in the center. Once all three screws are in place, tighten them securely

---

For issues, contact Screen Innovations:
Phone: [phone] Option 3
Website: www.screeninnovations.com