Zero G: Raising the Drop Height

Disclaimer

Failure to comply with the following steps will result in a void of the manufacturer’s warranty. The dealer/ installer will be responsible for all costs associated with failure to comply, including replacement parts, and/ or additional on-site visits needed for repair work.

Zero G: Overview - Please Review before installation.

---

To Raise the Drop Height (Viewing Area)

Step 1:

• While the Moab is in User mode, press the UP button, to raise the screen to the desired viewing height.
• Press the STOP button when the top of the viewing area is at the desired position.

---

Step 2:

• Loosen the thumb screw connected to the wing cable spool.

---

Step 3:

• Turn the knob until the moving pulley is firmly pressed against the stopping plate.

• If the cable becomes loose, make sure it is still set correctly on all pulleys as shown.

---

Step 4:

• Make sure the wing cables both have tension on them.
• Tighten the thumb screw firmly to secure the wing drop setting.
• Perform steps 2 through 4 on both ends of the screen.
• Thumb screw must be firmly tightened to prevent the drop setting from changing.

---

For issues, contact Screen Innovations:
Phone: [phone] Option 3
Website: www.screeninnovations.com