Disclaimer
Failure to comply with the following steps will result in a void of the manufacturer’s warranty. The dealer/ installer will be responsible for all costs associated with failure to comply, including replacement parts, and/ or additional on-site visits needed for repair work.
Zero G: Overview - Please Review before installation.
MOAB General Operation
- For General operation using Moab, you will need to be in User mode and plugged into the external RJ45 port.
- The Upper Limit is set from the factory, but if it needs to be adjusted, you must unplug the motor from the board, and plug it into the top of the MOAB.
- Setting the upper limit incorrectly could damage your screen. Contact Screen Innovations if you need to adjust the upper limit.
Refer to the Zero G: Setting the Lower Limit for adjusting the limits.
- To adjust upper limit connect the MOAB directly to the motor
For issues, contact Screen Innovations:
Phone: 512.832.6939 Option 3
Website: www.screeninnovations.com
Comments
0 comments
Please sign in to leave a comment.