Zero G: Controls - Low Voltage Trigger

Disclaimer

Failure to comply with the following steps will result in a void of the manufacturer’s warranty. The dealer/ installer will be responsible for all costs associated with failure to comply, including replacement parts, and/ or additional on-site visits needed for repair work.

Zero G: Overview - Please Review before installation.

---

Connecting the Low Voltage trigger:

• Some projectors may have a low-voltage trigger that will allow your screen to drop when it is turned on and raise when turned off. Installer must supply conductor wire in the length and gauge needed.
• Connect a 3.5mm mini plug from the projectors 12v trigger output into the 3.5mm port on the board.

---

For issues, contact Screen Innovations:
Phone: [phone] Option 3
Website: www.screeninnovations.com