RTS AC: Disabling Obstacle Detection

NOTE: When Programming, all button presses must be completed within 2 seconds of the previous press.

This function gives the possibility to deactivate the obstacle detection during the downward movement.

---

To enter the Obstacle Setting Mode:

• Move the screen to half-way position.
• Press MY/STOP and UP briefly and again MY/STOP and UP until the screen jogs.

  • If the motor goes back into USER MODE (short jog) repeat previous step.

To De-activate:

• Press UP, UP quickly within 2 seconds. The screen will jog slowly and is now deactivated.

Confirm the New Setting and Exit the “Setting” mode.

• HoldMY/STOP until the screen jogs to confirm the new setting.

---

For issues, contact Screen Innovations:
Phone: [phone] Option 3
Website: www.screeninnovations.com