TRO.Y 2: Installation Instructions

---

Rack Mounting

Structured Wining Box Mounting

Din Rail Mounting

LED's and Button

Connections

---

Introduction

• • TRO.Y2 is an IP Control gateway that allows 3rd party integration with shades and screens via PoE and RS232.
  • TRO.Y2 allows advanced control options for all motor types including 485, RTS and Zigbee via its integration with wireless bridges.
  • Compatible wireless bridges include LinkProZ, Helen, TaHoma Switch and TaHoma.
  • Another feature allows TRO.Y2 to use handheld remotes and keypads to control any shade or screen.
  • New builtin real-time clock, events and scenes allow for expanded control options.

---

Features

• Embedded commissioning software
• 485 programming
• Powered via PoE
• 4 segmented 485 bus line
• Single integration point for third-party automation systems over IP or RS232
• Compatible with SDN 2.0 (485)
• Works with Somfy Synergy™ API
• Advanced Lutron compatibility
• Din Rail mounting capability
• Built-in Real Time Clock
• Create Scenes and Events for any motor type(s)

---

INITIAL CONSIDERATIONS

• This is designed to be installed indoors, Rack or Din Rail mounted.
• If utilizing Janus, it should be in close proximity to the Janus units not exceeding 200' for each port(refer to pg. 9 for more info.).
• TRO.Y 2 has four 485 ports, in order to segment and improve 485 bus.
• When deploying the shades where ever possible its a best practice to divide the shades into 4 segments. This will improve performance and lower latency on commands.

With 32 shades, and 4 Janus units, the preferred method of wiring is 1 Janus per port or 8 shades per port.

---

Rack Mounting

TRO.Y 2 can be mounted in various ways using these 10 screw hole locations.

---

Using Universal Rack Ear

• The symmetrical hole pattern of the TRO.Y 2 Universal Rack Ear allows these multi-functional Brackets to be mounted on either side of TRO.Y 2 in any orientation.
• This makes it possible to mount TRO.Y 2 to virtually any surface in multiple positions.

---

Using a Half Rack

• TRO.Y 2 can be mounted in a standard half rack using 2 Universal Rack Ears.

---

Using a Full Rack (Single TRO.Y 2 Unit)

• A single TRO.Y 2 unit can be mounted in a standard 19” rack using one Universal Rack Ear and one Long Rack Ear. 

---

Mounting with TRO.Y 2 Full Rack

TRO.Y 2 and Janus units can be coupled together and mounted in a standard 19” rack. Follow the steps on the following spread for installation.

• Using two (2) of the included DIN Rail Screws, install the DIN Rail onto the first TRO.Y 2 unit.
• Using three (3) Rack Ear Screws each (included), install the two DIN Rail Brackets on the opposite side of the second TRO.Y 2 unit.
• While holding both TRO.Y 2 units, slide the DIN Rail through both DIN rail Brackets.
  • Tighten both set screws using the provided 1.5mm hex tool.
• Slide the Rack Mount Fascia over the exposed DIN Rail bracket on the desired front face of the combined unit.
  • Fasten the fascia down with two Rack Ear Screws (on the top and bottom).
• Finally, fasten one Rack Ear to each TRO.Y 2 unit using three (3) Rack Ear Screws each.
• When combining a TRO.Y 2 and Janus use the DIN rail included with Janus.

---

Installing in a Structured Wiring Box

TRO.Y 2 can be installed into nearly any structured wiring enclosure using either the Universal Rack Ears or Universal DIN Rail Brackets.

Structured wiring enclosures are a convenient and professional way to manage wiring and mount supporting devices such as power supplies.

You can use one of the Jopplin Kits to have a complete mounting solution for the enclosure.

---

Parts included with the Jopplin Kit:

---

Depending on which Jopplin Kit is selected:

• Connect up to 2/4 TRO.Y 2 units or a combination of Janus and a TRO.Y 2 unit into the Stack Mount Brackets and shovels.
• Assemble top and bottom Power Supply Brackets and insert up to 2/4 Janus Power Supplies.
• Route Power Supply cables from 2/4 Power Supplies up to the 2/4 Janus units installed into the Stack Mount.

---

Din Rail Mounting

• TRO.Y 2 is available in both plenum and non-plenum options.
• If mounting in a plenum air space, ensure you have purchased one of the plenum rated TRO.Y 2 kits.
• TRO.Y 2 can be mounted in various ways using 10 screw hole locations.

---

Using Universal DIN Rail Bracket

• Similar to the Universal Rack Ear, the TRO.Y 2 Universal DIN Rail Bracket features a symmetrical hole pattern which provides 10 total mounting locations on TRO.Y 2.
• Each Universal DIN Rail Bracket has multiple threaded holes which accommodate set screws to lock the Brackets in place along the DIN Rail.

• Using the Universal DIN Rail Brackets TRO.Y 2 can be mounted in a variety of orientations and locations.
• The Universal DIN Rail Brackets are designed for TS-35 ‘Top Hat’ DIN Mounting Rail and can be mounted on the bottom or either side of TRO.Y 2.

---

LED's and Button Operation

LED information table

---

BUTTON OPERATION

All LEDs will turn off once you reach the software reset.

---

Connections

INSTALLATION - CONNECTIONS

Step 1: Connecting Power

• TRO.Y 2 uses PoE for Power: Connect to PoE switch or included power injector. (PoE 802.3 - compatible with all versions of PoE AT/BT).

• TRO.Y 2 offers the ability to connect up to 4 segments utilizing the 485 ports, using CAT5e/6 cable.
• For the highest level of performance, each segment should not contain more than 64 shades (for a total of 256 shades).
• If you have a system that contains more than 256 shades, we recommend adding an additional TRO.Y.

• The colors above are based on TIA 568B termination.
• The Helen/ serial port data output (WHT/BLUE) is the transmit (TX) from TRO.Y.
• The Helen/serial port data input (GRN) is the receive (RX) from TRO.Y.
• The labels from the Helen port are from EIA561

High speed control port settings:

• BAUD rate - 4800 - 56k
• Control bits - 8
• Parity - None
• Stop bits - 1

---

Step 2: Connecting BUS Devices without Janus

All 4 ports can be used to connect 485 devices, however no Bus power is provided by TRO.Y 2. 

---

Step 3: Connecting BUS Devices without Janus

PoE Connection provides 3rd party IP control, wireless control and connection to other TRO.Y 2s. 

---

For issues, contact Screen Innovations:
Phone: [phone] Option 3
Website: www.screeninnovations.com