Fixed Screens: Flown Kit

---

Step 1: FLOWN KIT

• Flown Kit Ceiling Mount should be installed between 6” and 1/3 the width of the screen from the left and right edge.
• Once placement is determined, anchor the ceiling mount to a joist, beam, or similar support structure.
• Make sure to drill the holes into a beam that can support the weight of the screen.

---

Step 2: FLOWN KIT

• Feed the cable through the griplock leaving sufficient slack to attach the griplock assembly to the channel nuts in the upper frame.
• Height adjustment and leveling is done by pulling the cable through the griplock, to lower the flown height, lift the screen up to release tenson and depressing the griplock release.

---

For issues, contact Screen Innovations:
Phone: [phone] Option 3
Website: www.screeninnovations.com