Fixed Screens: All Acoustic Transparent Materials Attachment

---

All material should unroll onto the protective sheet foam viewing side down, for material with snaps, the snap opening should face up when material is unrolled.

---

Step 1: MATERIAL ATTACHMENT

• Police the area for hardware, tools, or debris before laying out the included foam sheeting.
• Refer to the Material Rolling diagram at the bottom of page 12 for material orientation when unrolling the screen optic.
• Gloves must be worn when handling the material to prevent damage or marring of the screen optic. 
• Unroll the Maestro 2 material onto the protective foam sheeting viewing side down, the back is identified by the slight shine at the point where the white Maestro 2 attaches to the black tensioning media.
• Lay the black backer centered on the screen material with corner pockets facing up.
• Frame layout requires at least two people to perform, larger frames would require additional more.
• Center and lay the frame onto the screen material keep the frame flat to the material to avoided puncturing the optic with frame corners.
• Tuck the corners into the scrim and verify the frame is still centered. 

---

Step 2: MATERIAL ATTACHMENT

• Remove and discard the post retention bumpers and distribute the posts along the frame so they align with the holes in the screen’s black tensioning media.
• Refer to the Material Attachment Sequence diagram on page 12 and begin attaching the material to the posts by slipping the holes in the black tensioning media over the post.

---

For issues, contact Screen Innovations:
Phone: [phone] Option 3
Website: www.screeninnovations.com