Niño: How to add a Niño shade to Bond (RF only)

Niño Indoor Shades

Complete guide to our expanded line of indoor shading solutions

Shade TypesAccessoriesProgramming & Integration

Box

Open Roll

Duo

Roman

Zebra

Woven Wood

Cellular

Trapezoidal Cellular

Sheer

Low Voltage Power Panel

Side Channels

SI IP Bridge

1k PoE Switch

5 Channel Keypad

SI Eco-System - Zigbee

SI Eco-System - PoE

Integrating into Smart Things - Zigbee

Integrating into Bond - RF

RF Remote - Standalone

---

---

• From the devices tab, press the + button in the top right corner of the screen

---

• Under Devices, select the Shades, Roofs, Screens & Awnings button

---

• Click the Show All to open the list, scroll down and select Screen Innovations Niño

⚠️ Warning: This list is NOT in alphabetical order

.    

---

• Press the Start button
• Name your shade, and assign it to a room
• press Continue

---

• Remove the battery cover from the remote
• Press and hold the P button until the shade jogs once, then release the button
• for a second time, push and hold the P button until the shade jogs once again, then release the button
• Press the Yes button to continue

---

• Press the Pair button

---

• Once the shade jogs, press the Yes button at the bottom of the screen
• Test the shade, then press the Done button

---

• Now your shade is added to the Bond, press Done to finish, or add another like this to add more shades

---

For issues, contact Screen Innovations:
Phone: [phone] Option 3
Website: www.screeninnovations.com