Glydea Ultra 60 Drapery RTS Motor
Screen Innovations
Glydea Ultra 60 Drapery RTS Motor Overview
This guide covers programming and adjustment procedures for the Glydea Ultra 60 Drapery RTS Motor. Follow the video tutorials and procedures below to properly set up your motorized drapery system.
Info: All programming procedures require a Somfy RTS remote control. Ensure you have the correct remote before beginning setup.
Initial Programming
Complete initial setup and programming of your Glydea Ultra 60 motor following this comprehensive video guide:
Tip: During initial programming, the motor will learn the remote control and establish basic operational parameters. Have your remote ready and follow each step carefully.
Limit Adjustments in User Mode
Adjust the upper and lower travel limits of your drapery motor to ensure proper positioning:
Warning: Improper limit settings can cause fabric damage or motor strain. Test limits carefully and adjust gradually.
Reversing Motor Direction
If your drapery moves in the wrong direction when operated, use this procedure to reverse the motor rotation:
Info: Motor direction can be reversed without rewiring. This software adjustment changes the motor's internal direction logic.
Motor Speed Adjustment
Customize the operating speed of your motor to match your preferences and installation requirements:
Tip: Slower speeds provide quieter operation but longer travel times. Faster speeds complete cycles quickly but may be noisier.
Touch Motion
Enable and configure Touch Motion feature for manual drapery operation:
Info: Touch Motion allows gentle manual movement of the drapery to trigger automatic motor operation in the same direction.
Somfy Services
Access additional Somfy resources and support:
- Software and Tools
- Somfy U / Training
- Education
-
Technical Support
- Phone: 877-437-6639
- Hours: Monday - Friday, 8am - 8pm (EST)
Tip: For complex programming issues or advanced features, contact Somfy technical support directly. They have specialized knowledge of motor programming and troubleshooting.
Comments
0 comments
Please sign in to leave a comment.