TRO.Y 2: Installation Instructions - Rack Mounting

---

Screw Hole Locations

TRO.Y 2 can be mounted in various ways using these 10 screw hole locations.

---

Using Universal Rack Ear

• The symmetrical hole pattern of the TRO.Y 2 Universal Rack Ear allows these multi-functional Brackets to be mounted on either side of TRO.Y 2 in any orientation.
• This makes it possible to mount TRO.Y 2 to virtually any surface in multiple positions.

---

Using a Half Rack

• TRO.Y 2 can be mounted in a standard half rack using 2 Universal Rack Ears.

---

Using a Full Rack (Single TRO.Y 2 Unit)

• A single TRO.Y 2 unit can be mounted in a standard 19” rack using one Universal Rack Ear and one Long Rack Ear. 

---

Mounting with TRO.Y 2 Full Rack

TRO.Y 2 and Janus units can be coupled together and mounted in a standard 19” rack. Follow the steps on the following spread for installation.

• Using two (2) of the included DIN Rail Screws, install the DIN Rail onto the first TRO.Y 2 unit.
• Using three (3) Rack Ear Screws each (included), install the two DIN Rail Brackets on the opposite side of the second TRO.Y 2 unit.
• While holding both TRO.Y 2 units, slide the DIN Rail through both DIN rail Brackets.
  • Tighten both set screws using the provided 1.5mm hex tool.
• Slide the Rack Mount Fascia over the exposed DIN Rail bracket on the desired front face of the combined unit.
  • Fasten the fascia down with two Rack Ear Screws (on the top and bottom).
• Finally, fasten one Rack Ear to each TRO.Y 2 unit using three (3) Rack Ear Screws each.
• When combining a TRO.Y 2 and Janus use the DIN rail included with Janus.

---

For issues, contact Screen Innovations:
Phone: [phone] Option 3
Website: www.screeninnovations.com