Nano Duo: Box - Installation Guide

Nano Indoor Shades

Complete guide to our precision-engineered Nano shading solutions

Shade TypesAccessoriesProgramming & IntegrationWiring & Troubleshooting

Nano Box

Nano Open Roll

Nano Pocket

Nano Duo

Nano Coupled

Nano Manual

Janus

1K PoE Switch

SI IP Bridge

Kratos

TaHoma Switch

Side Channels

TRO.Y 2

Suite XVI

C4 Zigbee

Pocket Flap and Hanger Extrusions

SI Eco-System - 485

SI Eco-System - PoE

SI Eco-System - Zigbee

SI Eco-System - RTS

RF Remote - Standalone

Zigbee Remote Standalone

TaHoma Switch

Bond Bridge Pro - RTS Only

Bond Bridge Pro - EcoSystem Integration

3rd Party Integration

Wiring Pinouts

How to service the V2 Nano Box

How to swap a motor in a V2 Nano Box

How to swap a motor in a V1 Nano Box

How to fix roll overs and hembar jams

Nano Open Roll V2 motor Swap

How to fix Pin-holes in Blackout Fabric

Zigbee Troubleshooting

485 Troubleshooting

RTS Troubleshooting

DUO: Box

DUO 275 Pocket

DUO 375 Pocket

DUO Pocket Coupled

---

Table of Contents:

Terminating Wires

Installing the Brackets

Installing the Shade

Parts in the Box

---

Step 1: Terminating Wires

• Terminate pre-wire with the supplied terminal block.

---

Step 2: Mounting Brackets

✅ Important: Spacer Blocks - used to clear an obstruction in the fabric path.

• Connect spacer blocks to shade brackets before installation.
• Do not use more than 4 spacer blocks per bracket.

✅ Important: Leveling Shims - used if the window frame is out of level. the fabric path.

• Connect to shade brackets before installation.
• Do not use more than 2 leveling shims per bracket.

• Make sure the wall bracket lever is down (may already be down).

• If using RS-485 motors
  • Install terminal block bracket between jamb and wall bracket on the motor side using the supplied screws

---

Step 3: Installing the Shade

• Connect the shade and pre-wire connectors, then snap into the terminal block bracket.

• Hang shade onto wall brackets and center in opening.

• Use thumb to lock shade in place.

---

Parts in the Box

---

For issues, contact Screen Innovations:
Phone: [phone] Option 3
Website: www.screeninnovations.com