Nano Box: Duo - Installation Instructions

---

Step 1: Terminating Wires

• Terminate pre-wire with the supplied terminal block.

---

Step 2: Mounting Brackets

• Spacer Blocks - used to clear an obstruction in the fabric path.
  • Connect spacer blocks to shade brackets before installation.
  • Do not use more than 4 spacer blocks per bracket.

• Leveling Shims - used if the window frame is out of level.
  • Connect to shade brackets before installation.
  • Do not use more than 2 leveling shims per bracket.

• Make sure the wall bracket lever is down (may already be down).

• If using RS-485 motors
  • Install terminal block bracket between jamb and wall bracket on the motor side using the supplied screws

---

Step 3: Installing the Shade

• Connect the shade and pre-wire connectors, then snap into the terminal block bracket.

• Hang shade onto wall brackets and center in opening.

• Use thumb to lock shade in place.

---

Nano: Wiring Pinouts

---

For issues, contact Screen Innovations:
Phone: [phone] Option 3
Website: www.screeninnovations.com