Solo 3: Indoor 375 - RTS - Putting the motor to Sleep

---

Before storing, servicing, or transporting, deactivate the motor by putting it in sleep mode to ensure the screen does not deploy or get damaged.

Delivery” or Sleep Mode:

• Use a thin tool to hold the button on the back of the remote until the screen jogs once.
• Press and hold the UP, STOP, and DOWN buttons at the same time until the screen jogs again.
• The motor is now asleep.

---

Wake-up Mode:

Prior to use, wake the screen from sleep.

• Plug the charger into the wall, connecting the charging cable to the charger and magnetic charging port on the cassette.
  • The screen will jog up and down once to signal that the motor is now awake.
• In case the charger does not wake up the screen, use a thin tool to briefly press the motor button through the small hole just in front of charging port.
  • The screen will jog once to indicate it is awake.

---

For issues, contact Screen Innovations:
Phone: [phone] Option 3
Website: www.screeninnovations.com