Solo 3: Indoor 575/675 - MOAB and Wiring

---

For internal MOAB installation, it can be slid onto the Din Rail located on the left side of your screen.

---

EXTERNAL MOUNT

INSIDE CASSETTE WIRING – 24V DC

• Terminate the wires using the provided terminal block, shown below.

---

Detailed Low Voltage Power and 485 Control Wiring (DC Motor)

---

INSIDE CASSETTE WIRING – 110V/220V AC

• Terminate the wires with the provided terminal block, as shown below.
• Locate junction box appropriately.

---

---

FLUSH MOUNT

INTERNAL CASSETTE WIRING – 24V DC

• Terminate the wires with the provided terminal block/ RJ45 as shown below.

---

Detailed Low Voltage Power and 485 Control Wiring (DC Motor)

---

INTERNAL CASSETTE WIRING – 110V/220V AC

• Terminate the wires with the provided terminal block/ RJ45 as shown below.
• Make sure an appropriate junction box or power receptacle is located within 5ft of the installation location.
• The installer must follow all local electrical codes when connecting 110v AC power. A certified electrician is required to connect pigtail power.

---

---

For issues, contact Screen Innovations:
Phone: [phone] Option 3
Website: www.screeninnovations.com