OPERATING AND CARE OF YOUR SCREEN
- Operation of the screen systems should only be performed by responsible parties.
- Always check the path of the Solo 3 screen before operating to ensure that the path is clear of furniture or obstacles that could prevent full operation.
- Monitor the Solo 3 screen for smooth operation through its entire range.
- Operating a Solo 3 screen unattended may lead to damage from obstructions or other causes.
- Fabric maintenance and cleaning– Solo 3 screen fabric is subject to debris under normal use or in storage, requiring occasional maintenance and cleaning.
- While fading and wear over time are normal, debris could accelerate this wear.
- Screen fabrics can be cleaned with water and a mild soap.
- Scrubbing with a bristle brush or pad is not recommended.
BEFORE PROCEEDING
For best results, read the instructions in their entirety before proceeding with assembly. Actions contrary to the instructions invalidate the warranty and may result in serious damage and/or injury.
Preparing for Installation:
- It is crucial that all installations are planned out carefully before specifying a screen order and assembly.
- Before installation, Bracket/Mounting method and Assembly Installation method must be identified.
- Do not use a knife to cut foam or wrapping, as this may damage the shade including, but not limited to, the cassette, fabric tube, and material roll.
- The tube may shift within the cassette during shipping; open the cassette with care.
- Unpacking the box – lay cassette, fabric tube, and material roll on a soft, clean surface during the installation process.
- When removing from the box, ensure the assembly is kept horizontal to prevent damage.
- Screen Innovations recommends METHOD 2 (removal of the material roll before installation) when installing the Solo 3 screen for better control and safety of the material inside.
- When removing material from the cassette, use at least two people to lay material down on a clean, flat surface, such as a blanket or sheet.
- When utilizing either method, especially METHOD 1, make certain there are enough installers/ hoisting equipment to safely lift the cassette (and/or material) onto the brackets.
- Brackets must be level and in-line with one another before attempting to lift cassette onto brackets. Use safe lifting and rigging techniques.
Cut a rectangle pocket in the drywall or grid on the drop ceiling to accommodate the cassette size. Refer to the following drawing for dimensions.
BRACKET INSTALLATION METHODS
- When installing brackets and mounting the cassette/assembly, make sure to follow the complimentary instructions once readying the cassette for mounting.
- Bracket Method 1 – Drywall Mount instructions accompany the Mounting Method 1 – Drywall Mount instructions.
- Ensure matching instructions are followed.
Method 1 – Drywall Mount
Method 2 – Drop Ceiling Mount
ASSEMBLY INSTALLATION METHODS
- Before installation, determine your installation method according to your product order and installation preferences.
- The Solo 3 Indoor 575/675 Flush may be installed with or without the material/fabric tube.
- Method 1 details the removal and reinsertion of the material roll as well as installation of the cassette, while Method 2 outlines installation of the assembled unit.
- When using Method 2, ensure use of the accompanying Method 2: Material Only installation instructions.
- SI recommends Method 2— removing the material tube— if the screen is larger than 130."
Method 1 – Assembled
Method 2 – Disassembled (Cassette ONLY)
MOUNTING METHODS
- The Solo 3 Indoor 575/675 Flush may be mounted in drywall or drop ceiling.
Method 1 – Drywall Mount
Method 2 – Drop Ceiling Mount
For issues, contact Screen Innovations:
Phone: 512.832.6939 Option 3
Website: www.screeninnovations.com
Comments
0 comments
Please sign in to leave a comment.