Zero G Pro: Setting the Limits

---

• Press and hold the programming button on the back of the remote control until the LED light in the programming hole illuminates.
• Move the screen to the desired position and press the “Stop” button.
• Press and release the program button and verify that the LED light has turned off.

---

• To guarantee the screen’s precise positioning and safety, when using the motor adjustment key, lift and lower the screen after every half rotation of the button to verify correct movement.
• Exercise extreme caution when setting the screen’s retraction height.
• Over-adjusting may lead to the bottom bar becoming lodged in the casing, potentially damaging the screen, or causing the bottom bar to drop.
• Similarly, careful consideration is needed when setting the screen’s deployment height.
• The steel cable should not extend beyond 5 meters; exceeding this limit could reverse the cable reel, hindering screen retraction.

---

For issues, contact Screen Innovations:
Phone: [phone] Option 3
Website: www.screeninnovations.com