Short Throw Motorized: Ceiling - "Flown" Mount

---

Step 1: CEILING - "FLOWN" MOUNT

• Insert the locking plate into the slotted flown adaptor and install through the bottom of the wall/ ceiling bracket.
• Secure by using the included M5 x 10 screws. (applies to both brackets)

---

Step 2: CEILING - "FLOWN" MOUNT

• Cables and anchors should be mounted to fall within 2.5” and 9.5” from left and right edge of the cassette.
• Though the bracket supports flown mount, Screen Innovations does not include cable, anchors, or rigging hardware.

---

Step 3: CEILING - "FLOWN" MOUNT

• Install the brackets onto the cassette and fully tighten the locking screws.
• To secure the casing, place the two ends of the casing flatly onto the bracket, ensuring proper alignment.
• Then, push the casing into the bracket until the locking tooth engages.
• You will hear a distinct locking sound when the casing is securely fixed onto the bracket.
• Once locked, tighten the lock screw to complete the installation.
• Please refer to the following illustration for guidance.

---

For issues, contact Screen Innovations:
Phone: [phone] Option 3
Website: www.screeninnovations.com