Niño - Adding your Niño to the SI Eco-System

Firmware Updates

• Make sure both your TRO.Y 2 and Helen firmware is up to date
  • TRO.Y - Jan. 2025 - v3.24
  • Helen - Jan. 2025 - v1.3

---

Adding a Niño Shade to TRO.Y / Helen

• Make sure your Zigbee network is established in TRO.Y and all necessary Zigbee Routers are connected

---

• In the TRO.Y GUI: Select the INTEGRATION TABLE

• Next, select the DEVICE TABLE

• Next, press the OPEN ZIGBEE PAIRING button

• Make sure the shade the shade is Awake buy pressing and holding the Motor Head Button for 1 jog

• Now you will put the shade into Discovery Mode by pressing and holding the Motor Head button until the shade jogs twice, the LED will turn RED

• When your shade populates in the Device Table you can Label it, then Save Edits

• Repeat this process to add additional shades
• When all shades are added press the yellow CLOSE ZIGBEE PAIRING button
• Press the BACK button in the Device Integration Table to return to the Aggregate Integration Table page and Commit the Integration table by pressing the COMMIT INTEGRATION TABLE button yellow TABLE IS NOT COMMITTED will turn Green and say TABLE IS COMMITTED

---

For issues, contact Screen Innovations:
Phone: [phone] Option 3
Website: www.screeninnovations.com