Niño: Installing an Open Roll - Inside Mount – Screen Innovations

Niño Shades Installation Instructions

Foam & Bracket Removal

Ensure all shipping foam is removed from both the motor head side and the idler side of the shade. Remove brackets from the shades as shown.

Nino Foam Removal.png

Outside / Inside Mount

Determine whether your window shades will be outside or inside mount, and follow the corresponding steps.

Nino in-out mount.png

Installing Brackets – Measuring & Marking

Measure 2–6 inches from each end of the box/roll. Ensure brackets are level and spaced evenly. Mark the bracket positions.

Installation - Inside Mount

Use the appropriate fasteners to securely mount the brackets

Nino Installing Brackets.png

Nino Roll Bracket.png

Installation – Inside Mount - Roll

Nino Inside mount.png

Mount the Roll on the installed brackets as shown below.

Nino Inside Roll mount.png

Your shade is now installed, you can now set your limits and set up your remote.

For issues, contact Screen Innovations:
Phone: 512.832.6939 Option 3
Website: www.screeninnovations.com