Niño: Installing a Box - Outside Mount

Niño Shades Installation Instructions

---

Foam & Bracket Removal

Ensure all shipping foam is removed from both the motor head side and the idler side of the shade. Remove brackets from the shades as shown.

---

Outside / Inside Mount

Determine whether your window shades will be outside or inside mount, and follow the corresponding steps.

---

Installing Brackets – Measuring & Marking

Measure 2–6 inches from each end of the box/roll. Ensure brackets are level and spaced evenly. Mark the bracket positions.

---

Installation - Outside Mount

Use the appropriate fasteners to securely mount the brackets

• Box: Follow specific steps for box shades.

 

---

Installation – Outside Mount - Box

Use the provided fasteners to secure the brackets in marked positions.

Note: For box shades, use the provided spacers.

---

Your shade is now installed, you can now set your limits and set up your remote.

Nino: Adjusting Limits and Motor Controls

Nino: Remote Control

---

For issues, contact Screen Innovations:
Phone: [phone] Option 3
Website: www.screeninnovations.com