TRO.Y 2: Crestron HOME Integration

---

---

Step 1: TRO.Y Integration Settings

• Enter the TRO.Y GUI by typing its IP address into a browser
• Press the Integration Settings Button

                                                             

---

Step 2: TRO.Y Integration Settings

• Scroll Down and select the SHOW button under the Telnet/Json Server Settings.
• Select the TCP option.
• Enter your User Name and Password.
  • This can be anything, but it must match what is inputted into the Crestron HOME Gateway Driver.
• Press the Submit Button.

.           

---

Step 3: Restart the TRO.Y

• Go to the System Settings at the top of the Screen
• Scroll Down and press the Restart Button
  • Then confirm the Restart

                 

---

When the Control 4 Gateway driver is setup, you will see a "Good Connection" in the TRO.Y's Dashboards System Status.

---

Step 4: Crestron Home - Driver Setup

You only need one instance of the platform driver. This will create 16 blind / group extension drivers that you can later configure to control a blind or group.

• In Crestron Home Setup on the “Pair Devices” screen.
• Select Drivers and wait for the spinner to stop spinning to allow drivers to update.

• Select: Platform

• Select: Screen Innovations

• Select a room and select Troy Gateway to install the driver in the room.

• Enter the IP and port of the gateway, and the username and password (as entered when you login to the web interface of the gateway).
• Port is 23
• Leave Requires Authentication selected
• Select OK

• Leave Advanced Support blank.
• Select OK.

• The driver status should now show Online.

---

Step 5: Crestron Home - Driver Setup

• When the driver connects, it will automatically create 64 shade drivers in a folder that can be added to different rooms.

• Select the folder and add a device to a room.

• Click OK on the Installation settings leaving the Enables Configuration Mode check box unticked.

---

Step 5: Crestron Home - Shade Driver

To control a blind:

• Deselect group control toggle, and select the individual blind to control in the dropdown.
• Click Save

Shade Controls

Having saved the configuration in the touch panel config screen, thereafter all users will be presented with shade controls.

• Slider toggles - for adjusting the group/shade levels and a toggle to fully open/close the shade.
• Presets - To save a preset, adjust sliders to desired level, and click Save Position to save to one of 4 presets.
• There are 4 preset buttons on the controls page to recall the presets.

---

Step 6: Crestron Home - Shade Group Driver

The Shade Extension driver supports the following functionality.

• Blind and group configuration touch panel screen
• Blind / group touch panel controls
• Programming of events and actions

When you first add a shade driver to a room, if you open a touch panel user interface, and select the shade extension device you will be presented with a screen to configure the blind or group selection for that room.

To control a group:

• Select group control toggle and select the group to control in the dropdown.
• Set the blind count (number of blinds in group), and then choose the individual blinds in the group.
• THIS MUST MATCH THE GROUP CONFIGURATION EXACTLY AS SETUP IN THE TROY GATEWAY, OTHERWISE THE GROUP CONTROL/FEEDBACK WILL NOT WORK PROPERLY.
• Click Save

---

For issues, contact Screen Innovations:
Phone: [phone] Option 3
Website: www.screeninnovations.com