TRO.Y 2: Control 4 Integration

---

Step 1: TRO.Y Integration Settings

• Enter the TRO.Y GUI by typing its IP address into a browser
• Press the Integration Settings Button

                                                             

---

Step 2: TRO.Y Integration Settings

• Scroll Down and select the SHOW button under the Telnet/Json Server Settings.
• Select the TCP option.
• Enter your User Name and Password.
  • This can be anything, but it must match what is inputted into the C4 Gateway Driver.
• Press the Submit Button.

.           

---

Step 3: Restart the TRO.Y

• Go to the System Settings at the top of the Screen
• Scroll Down and press the Restart Button
  • Then confirm the Restart

                 

---

When the Control 4 Gateway driver is setup, you will see a "Good Connection" in the TRO.Y's Dashboards System Status.

---

Step 4: C4 Composer - Network Settings

• In the Connections tab under System Design, double-click the Screen Innovations Troy Gateway.
• Enter the TRO.Y's IP address and press Close.

.         

• In the Gateway Driver you will see the Operational Mode show: OK

---

Step 5: C4 Composer - Adding Drivers

• Search the Drivers for Screen Innovations, there will be 3 drivers to select and install and label.
  • Screen Innovations Troy Gateway - (Install only one instance of this Driver)
  • Screen Innovations Blind - (Install one driver for each individual shade in the system)
  • Screen Innovations Blind Group - (Install one driver for each shade group in the system)

Download the latest versions of the drivers here 

.                                               

---

Step 6: C4 Composer - Gateway Driver

About the Control 4 Gateway Driver

• Enter the Gateway Username and Password used in the Telnet/Json Server Settings of the TRO.Y

• Select the ACTIONS tab and press the Discover Devices Button

---

Step 7: C4 Composer - Blind Driver

About the Blind and Blind Group Drivers

• In the Blind Name drop down, select the shade for this driver.
• Select the ACTIONS tab, and press the Measure Travel Time button.
  • THIS IS REQUIRED FOR 2 WAY FEEDBACK
  • This will move the shade to calculate the travel time, and will show in seconds.

---

Step 8: C4 Composer - Blind Group Driver

About the Blind and Blind Group Drivers

• In the Blind Group drop down, select the Shade Group (created in TRO.Y)

• In the Group Master Blind, select on shade in that group to be the Master, usually the largest shade of the group.

• Select the ACTIONS tab and press the Measure Travel Time Button.
• THIS IS REQUIRED FOR 2 WAY FEEDBACK
• This will move the shade group to calculate the travel time, and will show in seconds.

---

For issues, contact Screen Innovations:
Phone: [phone] Option 3
Website: www.screeninnovations.com