Nano Box: Putting the motor to sleep and waking it up (Delivery Mode)

---

Before storing, servicing, or transporting, deactivate the motor by putting it in sleep mode, to make sure the shade does not deploy or get damaged.

---

For RTS Motors - Putting the motor to Sleep (Delivery Mode):

• “Delivery” or Sleep Mode:
  • Use a thin tool to hold the button on the back of the remote until the shade jogs once.
  • Press and hold the UP, STOP, and DOWN buttons at the same time until the shade jogs again.
  • The motor is now asleep.

---

For ZIGBEE Motors - Putting the motor to Sleep (Delivery Mode):

• For older V1 Zigbee Motors (Big Motor Head Button):
  • Push and Hold the motor Head Button for 1 jog.
• For newer V2 Zigbee Motors (Tiny Motor Head Button):
  • The motor will automatically go to sleep after 15 minutes of inactivity or disconnected from power.

---

For RTS and Zigbee Motors - Waking the motor up:

• Prior to use, wake the shade from sleep.
  • Plug the charger into the wall, connecting the charging cable to the charger and magnetic charging port on the cassette.
  • The shade will jog up and down once to signal that the motor is now awake. b. In case the charger does not wake up the shade, use a thin tool to briefly press the motor button through the small hole just in front of charging port.
  • The shade will jog once to indicate it is awake.

---

For issues, contact Screen Innovations:
Phone: [phone] Option 3
Website: www.screeninnovations.com