Glydea Ultra 60 RTS Motor - Instruction Videos

Screen Innovations

Info: This guide provides video tutorials for programming and adjusting the Glydea Ultra 60 RTS Motor. Each procedure is demonstrated step-by-step in the embedded videos.

Quick Navigation: Use the sections below to jump to specific programming procedures.

Initial Programming

▼

Learn how to perform the initial setup and programming of your Glydea Ultra 60 RTS Motor. This video covers the basic programming sequence required to get your motor operational.

Limit Adjustments in User Mode

▼

Adjust the upper and lower limits of your motor travel in user mode. This procedure allows you to fine-tune the screen positioning without entering installer mode.

Reversing Motor Direction

▼

If your motor is running in the wrong direction, use this procedure to reverse the motor rotation. This is a common adjustment needed during initial installation.

Motor Speed Adjustment

▼

Customize the operating speed of your motor for optimal performance and noise levels. This adjustment helps achieve the desired screen deployment speed.

Touch Motion

▼

Configure the touch motion feature that allows manual positioning of the screen with gentle pressure. This feature provides convenient manual operation when needed.

Somfy Services

▼

Additional resources and support services available from Somfy for installers and technicians.

Available Resources:

• Software and Tools
• Somfy U / Training
• Education

Technical Support:

• Technical Support Portal
• Phone: [phone]
• Hours: Monday - Friday 8am - 8pm (EST)

Screen Innovations | screeninnovations.com | Support: 512.832.6939 (Option 3)

☰

View

Expand All Collapse All

Dark Mode

Sections

Initial Programming Limit Adjustments in User Mode Reversing Motor Direction Motor Speed Adjustment Touch Motion Somfy Services