Nano: Side and Sill Channel Installation Instructions (Outside Mount)

---

Step 1: Installing the Side Channels

• Install the Nano Box shade prior to installing Side & Sill Channels.
  • Pre-drill holes 3” from each end and add few more holes approximately 12” apart over length.
  • Rear mounting will be used on outside mount installations.
• Install channels under the box shade, aligned to the edge of the end caps.
• Secure channels to wall with included screws in each of the drilled holes.
• Repeat same for opposite side of window.

---

Step 2: Installing the Side Channels

• Roll down the shade, checking to ensure the fabric doesn’t drag or rub the inside of the channel.
• Install the covers.

---

Step 3: Installing the Side Channels

• To secure the covers, use the supplied install tool.
• Using a mallet, tap the tool to snap the outside extrusion into the mounted extrusion.
• This could take quite a bit of force.
• Once started work your way down continuing to tap the tool to seat the extrusion.
• Repeat for the other side.

---

Step 4: Installing the Sill Channel

• Optional - Install the sill channel at the bottom.
• Secure the channel covers to wall with included screws in each of the drilled holes.

---

For issues, contact Screen Innovations:
Phone: [phone] Option 3
Website: www.screeninnovations.com