Dan Rosen

Installing U-Channels Pre-drill the U-channel: 2 holes for TOP, MIDDLE and BOTTOM. 1 hole every 12 inches in spacing Attach the U-Channel beneath the brackets. Secure the U-channels on both s...

NOTE: When Programming, all button presses must be completed within 2 seconds of the previous press. This function gives the possibility to deactivate the obstacle detection during the downward mov...

Never use abrasive scrub pads, oil-based solvents, or concentrated detergents to clean screen material. Always test cleaning solutions in a small inconspicuous area to check for compatibility. “...

Article Links: Pairing the remote Entering Programming Mode Changing Motor Rotation Setting Limits Adjusting Limits Erasing Limits Obstacle Detection Sensitivity Continuous Movement Mode Toggle D...

  TRO.Y Programming Guide TRO.Y Installation Guide   Discovering TRO.Y on the Network   Updating Firmware:   Enabling Helen:   Adding a Smart Plug:   Querying a pre-configured TRO.Y for Shade...

PARTS IN THE BOX – SOLO 3 675 EXTERNAL – INDOOR PARTS IN THE BOX – SOLO 3 INDOOR 575/675 – FLUSH PARTS IN THE BOX – SOLO 3 INDOOR 375 EXTERNAL  

***IMPORTANT*** Since Somfy RTS motors use the same procedure to Pair and Unpair an RTS transmitter, you MUST power only one motor at a time when configuring Somfy channels. To reset the motor and...

Never use abrasive scrub pads, oil-based solvents, or concentrated detergents to clean screen material. Always test cleaning solutions in a small inconspicuous area to check for compatibility. ...

Quick Links: Initial Programming Limit Adjusting Reverse Motor Direction Motor Speed Adjustment Touch Motion Somfy Services Initial Programming   Limit Adjustments in User Mode   Reversing...