Dan Rosen

Setting Limits on a Revolve Curtain Rod:  

Installing a Current Luxury Revolve Curtain Rod:  

Step 1: Software and COM Port   Download the latest SDN Motor Configuration software. * When possible, install as administrator. This can be downloaded from: Download the Somfy SDN Motor Configu...

Integrating Control 4 to TRO.Y:   Integrating Bond to TRO.Y:   Integrating Crestron Home to TRO.Y:   Integrating Crestron SIMPL to TRO.Y:   Integrating Savant to TRO.Y:   Integrating URC to T...

Status LED's: There is a Red LED on the Motor Head. OFF - Motor has limits set, but does not necessarily have a remote paired. ON - Motor does not have limits set. Blinking (2 slow, 1 quick) -...

***IMPORTANT*** Since Somfy RTS motors use the same procedure to Pair and Unpair an RTS transmitter, you MUST power only one motor at a time when configuring Somfy channels. To reset the motor and...

NOTE: When Programming, all button presses must be completed within 2 seconds of the previous press. This function gives the possibility to deactivate the obstacle detection during the downward mov...

On the Programmed Remote: Using already programmed remote, select the remote (single channel) or the channel, (1–5) of a multi-channel remote. Press and hold the programming button of that remote...

Factory Resetting the motor will erase all limits and paired remotes. To Factory Reset the motor: Push and hold the Programming button on the motor head until the screen/shade jogs three times. ...

Step 1: Setting the Favorite (MY) Position Press the UP or DOWN to operate motor. At the desired Favorite (MY) (preferred) position press STOP/MY to stop the motor. Once the desired Favorite (MY...